Problem with running code on Lego Mindstorms NXT 2.0 in Simulink via Bluetooth
7 ビュー (過去 30 日間)
古いコメントを表示
Hello Everyone,
I am trying to run a test code on a Lego Mindstorms NXT 2.0 using Simulink and Matlab Support package for Lego Mindstorm NXT 2.0 via Bluetooth.
I have installed the Support package using the "targetinstaller" on Matlab R2012a and I follow the instructions line by line, but it doesn't work and I receive the following error message:
The call to realtime_make_rtw_hook, during the entry hook generated the following error: Connecting to LEGO MINDSTORMS NXT failed. Check that: 1. LEGO MINDSTORMS NXT is powered on. 2. USB connection to the LEGO MINDSTORMS NXT is working. 3. LEGO MINDSTORMS NXT is not running an application.
The build process will terminate as a result.
I am following these instructions for setting up the Bluetooth connection: http://www.mathworks.com/help/toolbox/simulink/ug/bs9ked3-1.html
and this one to run the model on target: http://www.mathworks.com/help/toolbox/simulink/ug/bs9kd9y-1.html
This is What I did: - Created and ran models using Lego's LabVIEW-like application using USB And Bluetooth --> Success
- Installed Simulink Support package using target installer --> Success
- Created a simple Simulink model and ran it on the Lego using USB --> Success
- Tried to run the same Simulink model on the Lego using Bluetooth, and when I choose ( Tools -> Run on target Hardware -> Run ) --> Fail!
Note:
- I am using a Bluetooth Dongle attached to my computer
- I am running Matlab R2012a and Lego Mindstorms NXT 2.0
- I have updated NXT firmware when installing the Support package
- Bluetooth on NXT is turned on and paired with my Computer and I have 2 virtual COM ports
** I have tried everything: Re-Pairing my Bluetooth Device, Reconnecting, turning it on and off, restarting windows! Nothing worked! Any suggestions? Has anyone had the same problem with the Bluetooth in Simulink?
Thank you, Ramtin
1 件のコメント
Raghav
2013 年 5 月 23 日
Hi Ramit! Were you able to solve the issue. I am facing the same issue with my connection too I am using MATLAB 2012b and NXT2. I tried connecting through USB instead of bluetooth to run the code in Simulink.
The error which comes is
The call to realtime_make_rtw_hook, during the after_make hook generated the following error: Could not find the COM port for the Bluetooth connection with the NXT brick 'NXT'. Use 'Add a device' in the Windows Control Panel to create a Bluetooth connection with your NXT brick. The build process will terminate as a result.
Could not find the COM port for the Bluetooth connection with the NXT brick 'NXT'. Use 'Add a device' in the Windows Control Panel to create a Bluetooth connection with your NXT brick.
Is it necessary to establish a bluetooth connection to use external mode?
回答 (1 件)
Stephen R.
2012 年 8 月 27 日
Hi Ramtin. Did you select 'Enable External mode' in the Simulink configuration parameters before running via Bluetooth? This checkbox must be selected to enable Bluetooth communication between the LEGO and Simulink. Also, did you double-check the possible connection problems highlighted in the error message, specifically, did you verify that the LEGO brick was powered on, that you were still connected via USB (to download the model) and that no other application was still running on the LEGO? HTH. -Stephen
0 件のコメント
参考
カテゴリ
Help Center および File Exchange で LEGO MINDSTORMS EV3 Hardware についてさらに検索
製品
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!