Get Started with Wireless Testbench

Wireless Testbench™ enables you to test wideband wireless systems using MATLAB^® with a software-defined radio (SDR). You can use your SDR to perform spectrum monitoring with high-speed data capture.

The product provides capabilities such as intelligent signal capture and hardware-based resampling that leverage the FPGA hardware on the SDR. You can specify waveform-specific characteristics to trigger signal capture and analyze the data of interest. You can also transmit and capture custom signals at arbitrary sample rates or standards-based signals (5G and WLAN) at their native sample rates.

Tutorials

• Capture from Frequency Band
  

  Capture IQ data using single radio antenna and plot the frequency spectrum of the captured data.

• Triggered Capture Using Preamble Detection
  

  Capture data from the air upon detecting a preamble sequence.

• Triggered Capture Using Energy Detection
  

  Capture data from the air upon detecting signal energy.

• Transmit Waveform
  

  Transmit generated waveform using single radio antenna.

• Loopback Transmit and Capture
  

  Transmit and capture generated waveform using single radio.

About Wireless Testbench Reference Applications

• Wireless Testbench Applications on SDR
  

  Learn how Wireless Testbench integrates software-defined radio (SDR) capabilities.

• Supported Radio Devices
  

  List of SDR devices that you can use with Wireless Testbench.