SoC Bus Creator
Convert control signals to bus
Libraries:
SoC Blockset /
Hardware Logic Connectivity
Description
The SoC Bus Creator block combines a set of signals into a bus. The block accepts control signals and outputs a bus.
You can configure this block to support multiple protocol interface types. Parameter and port configurations for this block vary based on your desired protocol interface type and mode of operation, as outlined in this table.
Protocol Interface Type | Mode of Operation | Parameter Configuration | Enabled Input Ports |
---|---|---|---|
Data stream | Read data stream | Set Control protocol to | ready |
Write data stream | Set Control protocol to | valid | |
tlast | |||
Pixel stream | Read video stream | Set Control protocol to | ready |
Write video stream | Set Control protocol to
| hStart | |
hEnd | |||
vStart | |||
vEnd | |||
valid | |||
Read video stream with frame sync | Set Control protocol to
| ready | |
fsync | |||
Random access read | Read data | Set Control protocol to
| rd_addr |
rd_len | |||
rd_avalid | |||
rd_dready | |||
Random access write | Write data | Set Control protocol to
| wr_addr |
wr_len | |||
wr_valid |
Examples
Histogram Equalization Using Video Frame Buffer
Perform histogram equalization with HDMI input and output and using external memory for video frame buffering.
Ports
Input
valid — Valid control signal
boolean scalar
Valid control signal, specified as a scalar. You can use this port for data stream and pixel stream protocols only.
Dependencies
To enable this port, set the Control protocol parameter to
either Data stream
or Pixel
stream
and the Control type parameter to
Valid
.
Data Types: Boolean
tlast — Indication of end of data packet
boolean scalar
Indication of end of the data packet, specified as a Boolean scalar.
Dependencies
To enable this port, set the Control protocol parameter to
Data stream
and the Control type
parameter to Valid
.
Data Types: Boolean
ready — Ready control signal
boolean scalar
Ready control signal, specified as a Boolean scalar. This port is available for
Data stream
and Pixel stream
control protocols.
Dependencies
To enable this port, set the Control protocol parameter to
either Data stream
or Pixel
stream
and the Control type parameter to
Ready
or Ready with frame
sync
.
Data Types: Boolean
hStart — First pixel in horizontal line of frame
boolean scalar
First pixel in a horizontal line of a frame, specified as a Boolean scalar.
Dependencies
To enable this port, set the Control protocol parameter to
Pixel stream
and the Control type
parameter to Valid
.
Data Types: Boolean
hEnd — Last pixel in horizontal line of frame
boolean scalar
Last pixel in a horizontal line of a frame, specified as a Boolean scalar.
Dependencies
To enable this port, set the Control protocol parameter to
Pixel stream
and the Control type
parameter to Valid
.
Data Types: Boolean
vStart — First pixel in first (top) line of frame
boolean scalar
First pixel in the first (top) line of a frame, specified as a Boolean scalar.
Dependencies
To enable this port, set the Control protocol parameter to
Pixel stream
and the Control type
parameter to Valid
.
Data Types: Boolean
vEnd — Last pixel in last (bottom) line of frame
boolean scalar
Last pixel in the last (bottom) line of a frame, specified as a Boolean scalar.
Dependencies
To enable this port, set the Control protocol parameter to
Pixel stream
and the Control type
parameter to Valid
.
Data Types: Boolean
fsync — Frame synchronization
boolean scalar
Frame synchronization, specified as a Boolean scalar.
Dependencies
To enable this port, set the Control protocol parameter to
Pixel stream
and the Control type
parameter to Ready with frame sync
.
Data Types: Boolean
rd_addr — Reader address
scalar
Reader address, specified as a scalar. It is the starting address for the read transaction that is sampled at the first cycle of the transaction.
Dependencies
To enable this port, set the Control protocol parameter to
Random access read
.
Data Types: uint32
rd_len — Reader data length
scalar
Reader data length, specified as a scalar. It means the number of data values that you want to read, sampled at the first cycle of the transaction.
Dependencies
To enable this port, set the Control protocol parameter to
Random access read
.
Data Types: uint32
rd_avalid — Reader valid status
boolean scalar
Reader valid status, specified as a Boolean scalar. It indicates whether the read request is valid.
Dependencies
To enable this port, set the Control protocol parameter to
Random access read
.
Data Types: Boolean
rd_dready — Reader ready status
boolean scalar
Reader ready status, specified as a Boolean scalar. It indicates when the hardware logic can start accepting data.
Dependencies
To enable this port, set the Control protocol parameter to
Random access read
.
Data Types: Boolean
wr_addr — Writer address
scalar
Specify the starting address to which the hardware writes.
Dependencies
To enable this port, set the Control protocol parameter to
Random access write
.
Data Types: uint32
wr_len — Writer data length
scalar
Specify the number of data elements in the write transaction.
Dependencies
To enable this port, set the Control protocol parameter to
Random access write
.
Data Types: uint32
wr_valid — Writer valid data
boolean scalar
Writer valid data, specified as a scalar. It indicates the data signal sampled at the output is valid.
Dependencies
To enable this port, set the Control protocol parameter to
Random access write
.
Data Types: Boolean
Output
ctrlBus — Output control bus
bus
Output control bus, returned as a bus.
The data type of the output control bus depends on the values of the Control protocol and Control type parameters.
Parameter Configuration | Output Data Type |
---|---|
Set Control protocol to | StreamS2MBusObj |
Set Control protocol to | StreamM2SBusObj |
Set Control protocol to | StreamVideoS2MBusObj |
Set Control protocol to | pixelcontrol |
Set Control protocol to | StreamvideoFsyncS2MBusObj |
Set Control protocol to | ReadControlM2SBusObj |
Set Control protocol to | WriteControlM2SBusObj |
Data Types: StreamS2MBusObj
| StreamM2SBusObj
| StreamVideoS2MBusObj
| pixelcontrol
| StreamvideoFsyncS2MBusObj
| ReadControlM2SBusObj
| WriteControlM2SBusObj
Parameters
Control protocol — Protocol interface selection
Data stream
(default) | Pixel stream
| Random access read
| Random access write
Specify the protocol interface as one of these values:
Data stream
— Use this protocol if you require AXI4 data stream.Pixel stream
— Use this protocol if you require AXI4 video stream.Random access read
— Use this protocol if you require AXI4 read.Random access write
— Use this protocol if you require AXI4 write.
The input ports of the block vary based on the type of Control protocol and Control type that you select. For more details, see Description.
Control type — Control type selection
Valid
(default) | Ready
| Ready with frame sync
Specify the type of control.
To enable the Ready with frame sync
option, set the
Control protocol parameter to Pixel
stream
.
The input ports of the block vary based on the type of Control protocol and Control type that you select. For more details, see Description.
Extended Capabilities
HDL Code Generation
Generate VHDL, Verilog and SystemVerilog code for FPGA and ASIC designs using HDL Coder™.
To automatically generate HDL code for your design, and execute on an SoC device, use the SoC Builder tool. See Use SoC Builder to Generate SoC Design.
Fixed-Point Conversion
Design and simulate fixed-point systems using Fixed-Point Designer™.
Version History
Introduced in R2019a
See Also
MATLAB コマンド
次の MATLAB コマンドに対応するリンクがクリックされました。
コマンドを MATLAB コマンド ウィンドウに入力して実行してください。Web ブラウザーは MATLAB コマンドをサポートしていません。
Select a Web Site
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .
You can also select a web site from the following list:
How to Get Best Site Performance
Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.
Americas
- América Latina (Español)
- Canada (English)
- United States (English)
Europe
- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)
- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)