CAN Device

R2026b

CAN hardware device for XCP on CAN external mode communication

Since R2026b

Model Configuration Pane: Hardware Implementation / Hardware board settings / Target hardware resources / Groups / Host-board connection

Description

Select the CAN hardware device on the host computer to use for XCP on CAN external mode communication. The list shows physical CAN hardware devices connected to the host computer for the selected CAN Vendor.

Dependencies

To enable this parameter:

1. Set Hardware board to one of these boards:

   • Arduino® Due

   • Arduino Uno R4 Wi-Fi®

   • Arduino Uno R4 Minima

   • Arduino Nano R4

   • Teensy 4.0 (Arduino compatible)

   • Teensy 4.1 (Arduino compatible)

2. Set Communication interface to XCP on CAN.

3. Set Host interface to Simulink.

   The device list is filtered based on the selected CAN Vendor. Changing the vendor updates the available devices.

Settings

first available device for the selected vendor (default) | dynamically populated from connected CAN hardware

Select the CAN device from the drop-down list. The list shows physical CAN hardware devices connected to the host computer for the selected vendor. Virtual CAN devices are not shown.

Recommended Settings

No recommendation.

Programmatic Use

No programmatic use is available.

Version History

Introduced in R2026b