センサー
気体の質量流量、エネルギー流量、圧力、温度のセンサー ブロック
このライブラリには、気体ドメインのセンサーが含まれます。これらのブロックは、通常の Simulink® 信号ではなく、物理量信号を出力します。これらのブロックを Simulink スコープや他の Simulink ブロックに接続する方法の詳細については、Simscape のブロック線図と Simulink のソースおよびスコープとの接続を参照してください。
Simscape ブロック
Flow Rate Sensor (G) | Measure mass, energy, and volumetric flow rates in gas networks (R2023a 以降) |
Mach Number Sensor (G) | Measure Mach number of internal gas flow (R2023b 以降) |
Pressure & Temperature Sensor (G) | Measure pressure and temperature in gas networks |
Thermodynamic Properties Sensor (G) | Measure specific enthalpy, density, specific heat at constant pressure, and specific entropy |
トピック
- 気体システムのモデル化
気体システムのモデル化のための手順とガイドライン。
- 簡単な気体モデル
この例では、単純な開ループの気体ネットワークを作成し、境界条件を設定する方法を説明します。
- 流れの境界条件の変更
この例では、温度に影響を与えずに気体流の境界条件を変更する方法を説明します。
- Change Flow Direction
This example shows how the change in the gas flow direction affects the upstream temperature.