回答済み
Angle of Arrival for UCA
You may want to take a look at root MUSIC algorithm provided in Phased Array System Toolbox https://www.mathworks.com/help/phas...

約7年前 | 0

回答済み
Adaptive beamforming using LMS
Hi Mirza, Thanks for requesting these features, we'll look into it.

約7年前 | 0

| 採用済み

回答済み
scale factor for constantGammaClutter model in phase array toolbox
The magnitude is determined by many factos, like the power and the value of gamma parameter. In addition, if your altitude is hi...

約7年前 | 0

回答済み
Relationship between noise power in a Band-Limited White Noise block VS Variance in a Random Number block
You may want to look at the Algorithm section of the following doc page https://www.mathworks.com/help/simulink/slref/bandlimit...

約7年前 | 3

| 採用済み

回答済み
Beamforming with FFT not showing Grating Lobes
This is because when you use FFT, by definition FFT covers only between 0 to 2pi. But when you have an element spacing of severa...

約7年前 | 0

回答済み
Problem in the initFcn callback of model
When you say that you rewrote the init function, did you overwrite it? If so, it should use the same one. You can certainly rena...

約7年前 | 0

回答済み
IMU sensor fusion viewer "HelperOrientationViewer"
You may have to open the example in MATLAB and click the "Open Example" button. That will copy all necessary helper functions in...

約7年前 | 1

| 採用済み

回答済み
Variable measurement length for trackingEKF
Could you elaborate what kind of system you are trying to model? In general the dimension of the measurement doens't change over...

約7年前 | 0

回答済み
delay and sum beamforming
Have you tried phased.PhaseShiftBeamformer? That would perform delay and sum beamforming for you. HTH

約7年前 | 0

回答済み
Radar simulation: How to apply a precise delay?
The FreeSpace in Phased Array System Toolbox uses fractional delay fitler to approximate the delay between samples. HTH

7年以上前 | 1

| 採用済み

回答済み
phased.URA 8 by 1 array
This is a linear array, you can consider using phased.ULA to model it. phased.URA requires multiple elements in both dimensions....

7年以上前 | 0

| 採用済み

回答済み
what does this error error mean? "Array formation and parentheses-style indexing with objects of class 'phased.PhaseShiftBeamformer' is not allowed. Use objects of class 'phased.PhaseShiftBeamformer' only as scalars or use a cell array."
Let's say you have two objects bf1 = phased.PhaseShiftBeamformer; bf2 = phased.PhaseShiftBeamformer; The message indicates th...

7年以上前 | 0

回答済み
PHASED ARRAY TOOLBOX/ SINUSOIDAL VIBRATING TARGET MODELLING
Nothing off the shelf at this point. This being said, the interface of features in Phased Array System Toolbox are numeric vecto...

7年以上前 | 0

回答済み
How can i use global2localcoord function with axes?
From what you describe, your x axis is [1 1 0] and your y axis is [-1 1 0]. When yo specify the axes matrix, each colum represen...

7年以上前 | 0

| 採用済み

回答済み
How can I use the constantGammaClutter function to generate the clutter with no ULA
You can set the Sensor property to something like phased.IsotropicAntennaElement and it will generate clutter accordingly. HTH

7年以上前 | 0

回答済み
How to add zero infront of number
I don't think you can pad zero for a numeric number but you can do it when printing. For example fprintf('num = %02d\n',2) Is ...

7年以上前 | 0

| 採用済み

回答済み
How can I use a matrix to be a loop variable
If you have somethign like mat = {mat1,mat2,mat3,mat4} You can do for m = 1:numel(mat) imshow(mat{m}) end HTH

7年以上前 | 0

| 採用済み

回答済み
sine wave shifted 90 degree
If it's really just a sine wave, you can consider hook it up with a integrator. HTH

7年以上前 | 0

回答済み
How to determine the rotation matrix for rotating one vector to align with another ?
There is no special meaning of rotvv other than it's one of the implementation to rotate one vector to be parallel to another on...

7年以上前 | 0

回答済み
Replace two-way propagation channel with two one-way propagation channels
This may have to do with your target location. The channel delays signal based on the distance. However, when the travel time is...

7年以上前 | 1

回答済み
XCORR function to find the lag time between two signals
We probably need a bit more info to understand why the lag is always the same. But by default xcorr returns the delay in lags, t...

7年以上前 | 0

回答済み
Error with the "Design an Internally Matched Ultra-wideband Vivaldi Antenna" example
You will need to open the example in MATLAB. In there you should have a button labled as "Open Example" or something close. When...

7年以上前 | 1

| 採用済み

回答済み
the element in radarObjects mean in Forward Collision Warning Using Sensor Fusion
The radarObject output is a detection, therefore it contains the information from the detected signal. If you have data from the...

7年以上前 | 0

回答済み
Frost beamformer internal calculations
Yes, the code is available to see if you do edit phased.FrostBeamformer The constraint is simply to return a distortion less ...

7年以上前 | 2

| 採用済み

回答済み
simulating RWR in R2016a
If you open the example in MATLAB and click "Open Example" button, all files assoicated with the example will appear in the temp...

7年以上前 | 0

回答済み
Possible to obtain ultra wide band monostatic radar model?
There is a wideband radar example at https://www.mathworks.com/help/phased/examples/modeling-a-wideband-monostatic-radar-in-a-m...

7年以上前 | 1

| 採用済み

回答済み
reading at UCA elements
Why would you say taht at least one antenna should not receive the signal? You are using isotropic element in the array so every...

7年以上前 | 0

| 採用済み

回答済み
phased.RangeDopplerResponse axis scaling
The input of RangeDopplerResponse is a matrix reprsents fast time and pulses. Therefore, if you have a TDM MIMO radar, you can e...

7年以上前 | 0

| 採用済み

回答済み
How to simulate automotive radar?
Have you looked at the following example? Would that be at the level you are interested? https://www.mathworks.com/help/phased/...

7年以上前 | 0

| 採用済み

回答済み
constantGammaClutter function usage?
These are high level steps but they look ok. I don't quite understand the last step though. What do you mean by "output of the c...

7年以上前 | 0