Main Content

C280x/C2802x/C2803x/C2805x/C2806x/C2833x/C2834x/F28M3x/F2807x/F2837xD/F2837xS/F2838x/F2838x-M4/F28004x/F28002x/F28003x GPIO Digital Output

Configure general-purpose input/output pins as digital input

expand all in page
  • Library:

  • Embedded Coder Support Package for Texas Instruments C2000 Processors / C2802x

    Embedded Coder Support Package for Texas Instruments C2000 Processors / C2803x

    Embedded Coder Support Package for Texas Instruments C2000 Processors / C2805x

    Embedded Coder Support Package for Texas Instruments C2000 Processors / C2806x

    Embedded Coder Support Package for Texas Instruments C2000 Processors / F2807x

    Embedded Coder Support Package for Texas Instruments C2000 Processors / F2837xD

    Embedded Coder Support Package for Texas Instruments C2000 Processors / F2837xS

    Embedded Coder Support Package for Texas Instruments C2000 Processors / F2838x

    Embedded Coder Support Package for Texas Instruments C2000 Processors / F28004x

    Embedded Coder Support Package for Texas Instruments C2000 Processors / F28002x

    Embedded Coder Support Package for Texas Instruments C2000 Processors / F28003x

    Embedded Coder Support Package for Texas Instruments C2000 Processors / F28M35x / C28x

    Embedded Coder Support Package for Texas Instruments C2000 Processors / F28M36x / C28x

  • C280x/C2802x/C2803x/C2805x/C2806x/C2833x/C2834x/F28M3x/F2807x/F2837xD/F2837xS/F2838x/F2838x-M4/F28004x/F28002x GPIO Digital Output block

Description

This block configures the general-purpose I/O (GPIO) MUX registers that control the operation of GPIO shared pins for digital input. Each I/O port has one MUX register that selects peripheral operation or digital I/O operation (the default). When a pin is configured for digital input, it becomes unavailable for digital output or peripheral operation. You can configure the Input qualification type for individual digital input pins. To configure, go to Configuration Parameters > Hardware Implementation > Target Hardware Resources and select the appropriate GPIO group.

Each processor has a different number of available GPIO pins.

Note

To avoid losing new settings, click Apply before changing the GPIO Group parameter.

Ports

Input

expand all

The input port to set the GPIO pin status.

Parameters

expand all

Select the group of GPIO pins you want to view or configure. For a table of GPIO pins and peripherals, refer to the Texas Instruments documentation for your specific target.

To configure a GPIO pin for digital output, select the check box next to it. Refer to the block for a table of all available peripherals for each pin.

A value of True at the input of the block drives the selected GPIO pin high. A value of False at the input of the block grounds the selected GPIO pin.

For each pin selected for output, you can elect to toggle the signal of that pin. In Toggle mode, a value of True at the input of the block switches the GPIO pin output level. Thus, if the GPIO pin was driven high, in Toggle mode, with the value of True at the input, the pin output level is driven low. If the GPIO pin was driven low, in Toggle mode, with the value of True at the input of the block, the same pin output level is driven high. If the input of the block is False, the GPIO pin output level is unaffected.

Note

The outputs of this block can be vectorized.

Version History

Introduced in R2016a

See Also