SVPWM Generator (3-Level)

Generate pulses for SVPWM-controlled three-level converter

Since R2018b

• 

Libraries:
Simscape / Electrical / Specialized Power Systems / Power Electronics / Power Electronics Control

Description

The SVPWM Generator (3-Level) generates pulses for three-phase three-level Neutral-Point-Clamped (NPC) converters. The block generates twelve pulses using the space vector pulse width modulation (SVPWM) technique.

The neutral-point voltage deviation is controlled by a proportional regulator using two DC voltages, as well as the DC current flowing in or out of the DC link. The defining equation is

$$V_{out}=m\cdot \frac{V_{dc}}{\sqrt{2}},$$

where:

• V_out is the line-to-line rms voltage generated by the NPC.

• m is the modulation index and 0 < m < 1.

• V_dc is the DC current flowing in or out of the DC link.

Examples

Three-Level NPC Inverter Using Space-Vector PWM with Neutral-Point Voltage Control

The operation of a 2-MVA, 3-Level NPC inverter using Space-Vector Pulse-Width-Modulation (SVPWM) technique with neutral-point voltage control.

Open Model

Ports

Input

Vabc_ref — Three-phase sinusoidal reference signal

vector

Reference voltage in terms of sinusoidal voltages. Specify three voltages, one per phase, that you want the attached converter to output.

Dependencies

Setting the Voltage reference (Vref) parameter to Three-phase signals exposes this parameter.

Data Types: single | double

|Vref|∠Vref — Reference voltage magnitude and angle

vector

Reference voltage in terms of magnitude and angle, in rad. Specify the magnitude and angle of the voltage that you want the attached converter to output.

Dependencies

Setting the Voltage reference (Vref) parameter to Magnitude-Angle (rad) exposes this parameter.

Data Types: single | double

Vα Vβ ref — Reference voltage alpha and beta components

vector

Reference voltage in terms of alpha and beta components. Specify the alpha and beta components of the voltage that you want the attached converter to output.

Dependencies

Setting the Voltage reference (Vref) parameter to alpha-beta components exposes this parameter.

Data Types: single | double

X (internal) — No input

null

When the block generates the reference voltage internally, no reference signal is input.

Dependencies

Setting the Voltage reference (Vref) parameter to Internally generated exposes this parameter.

Vc_P0 — Three-level NPC converter positive-to-neutral voltage

scalar

Voltage between the + and N terminals of the three-level NPC converter block that is controlled by the SVPWM Generator (3-Level) block.

Data Types: single | double

Vc_0N — Three-level NPC converter neutral-to-negative voltage

scalar

Voltage between the N and - terminals of the three-level NPC converter block that is controlled by the SVPWM Generator (3-Level) block.

Data Types: single | double

Idc — DC link current

scalar

Current of the DC link flowing out the three-level NPC converter block that is controlled by the SVPWM Generator (3-Level) block

Data Types: single | double

Output

P — Gate control

scalar

12-pulse waveforms that determine switching behavior in the attached power converter.

Data Types: single | double

NP_Ctrl_Out — Internal control voltage

scalar

Neutral-point deviation voltage of the generator control system.

Data Types: single | double

Parameters

Voltage reference (Vref) — Parameterization method

Three-phase signals (default) | Magnitude-Angle (rad) | alpha-beta components | Internally generated

Reference-voltage parameterization method.

Dependencies

Setting this parameter to:

• Three-phase signals exposes the Vabc_ref port, hides the Reference vector [ Mag (0<m<1), Phase (degrees), Freq (Hz) ] parameter, and hides the |Vref|∠Vref, Vα Vβ ref, and X (internal) ports.

• Magnitude-Angle (rad) exposes the |Vref|∠Vref port, hides the Reference vector [ Mag (0<m<1), Phase (degrees), Freq (Hz) ] parameter, and hides the Vabc_ref, Vα Vβ ref, and X (internal) ports.

• alpha-beta components exposes the Vα Vβ ref port, hides the Reference vector [ Mag (0<m<1), Phase (degrees), Freq (Hz) ] parameter, and hides the Vabc_ref, |Vref|∠Vref, and X (internal) ports.

• Internally generated exposes the Reference vector [ Mag (0<m<1), Phase (degrees), Freq (Hz) ] parameter and the X (internal) port and hides the Vabc_ref, |Vref|∠Vref, and Vα Vβ ref ports.

Proportional gain — Proportional gain

0.04 (default) | scalar

Constant for proportional gain.

Idc filter cut-off frequency (Hz) — Cut-off frequency

30 (default) | positive scalar

I_dc filter cut-off frequency, in Hz.

PWM switching frequency (Hz) — Switching frequency

1620 (default) | positive scalar

PWM switching frequency, in Hz.

Reference vector [ Mag (0<m<1), Phase (degrees), Freq (Hz) ] — Reference vector

[0.8 -30 60] (default) | vector

Three-element reference vector of magnitude, in m, phase, in degrees, and frequency, in Hz.

Dependencies

Setting the Voltage reference (Vref) parameter to Internally generated exposes this parameter.

Sample time — Block sample time

0 (default) | scalar

Time between consecutive block executions. During execution, the block produces outputs and, if appropriate, updates its internal state.

Extended Capabilities

C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.

Version History

Introduced in R2018b