Saturation Properties Sensor (2P)
Libraries:
Simscape /
Foundation Library /
Two-Phase Fluid /
Sensors
Description
The Saturation Properties Sensor (2P) block represents an ideal sensor that lets you measure these liquid and vapor saturation properties in a two-phase fluid network:
Saturated temperature, specific volume, internal energy, or enthalpy, based on the pressure measurement
Saturated pressure based on the temperature measurement
The block measures these properties at the node connected to port A. There is no mass or energy flow through the sensor.
By default, only the output ports that measure the saturated liquid and vapor temperatures, TL and TV, are visible on the block icon. Use the block parameters to control visibility of output ports for the other measurements.