最新のリリースでは、このページがまだ翻訳されていません。 このページの最新版は英語でご覧になれます。

カスタム コンポーネント

カスタム コンポーネントを表す Simscape™ ファイルの作成

言語構文

componentComponent model keywords
inputsDefine component inputs, that is, Physical Signal input ports of block
nodesDefine component nodes, that is, conserving ports of block
outputsDefine component outputs, that is, Physical Signal output ports of block
parametersSpecify component parameters
variablesDefine domain or component variables
setup(Not recommended) Prepare component for simulation
branchesEstablish relationship between component Through variables and nodes

例および操作のヒント

すべてのコンポーネント

Model Linear Resistor in Simscape Language

Overview of how modeling in Simscape language works, using a linear resistor as an example.

Mechanical Component — Spring

The following file, spring.ssc, implements a component called spring.

Electrical Component — Ideal Capacitor

The following file, ideal_capacitor.ssc, implements a component called ideal_capacitor.

No-Flow Component — Voltage Sensor

The following file, voltage_sensor.ssc, implements a component called voltage_sensor. An ideal voltage sensor has a very large resistance, so there is no current flow through the sensor. Therefore, declaring a Through variable, as well as writing branches and equation statements for it, is unnecessary.

Grounding Component — Electrical Reference

The easiest way to implement a grounding component is to use a connection to an implicit reference node. For an example of a component that provides an electrical ground to a circuit, see the source for the Electrical Reference block in the Foundation library:

Composite Component — DC Motor

This example shows how to implement a DC motor model by means of a composite component.

Triggered Delay Component

This example shows how to implement a triggered delay component.

Enabled Component

This example shows how to implement a component similar to a Simulink® enabled subsystem.

Switch with Hysteresis

This example shows how to model a component by using mode charts and enumerations.

Component Variants — Series RLC Branch

This example shows how to implement variants within a component file by using conditional sections.

コンポーネントの宣言と分岐

Declare a Spring Component

The following diagram shows a network representation of a mass-spring-damper system, consisting of four components (mass, spring, damper, and reference) in a mechanical rotational domain.

Declare Component Variables

When you declare Through and Across variables in a component, you are essentially creating instances of domain Through and Across variables. You declare a component variable as a Declaring a Member as a Value with Unit by specifying an initial value and units commensurate with units of the domain variable.

Declare Component Parameters

Component parameters let you specify adjustable parameters for the Simscape block generated from the component file. Parameters will appear in the block dialog box and can be modified when building and simulating a model.

Declare Component Nodes

Component nodes define the conserving ports of a Simscape block generated from the component file. The type of the conserving port (electrical, mechanical rotational, and so on) is determined by the type of its parent domain. The domain defines which Through and Across variables the port can transfer. Conserving ports of Simscape blocks can be connected only to ports associated with the same domain. For more information, see 物理ネットワークのモデル化の基本原則.

Declare Component Inputs and Outputs

In addition to conserving ports, Simscape blocks can contain Physical Signal input and output ports, directional ports that carry signals with associated units. These ports are defined in the inputs and outputs declaration blocks of a component file. Each input or output can be defined as:

Define Relationship Between Component Variables and Nodes

How to connect Through and Across variables declared in a component file to the domain Through and Across variables.

概念

What Is the Simscape Language?

Brief overview of the modeling language and its purpose.

Typical Simscape Language Tasks

Overview of the typical Simscape language workflows, with links to background information and examples.

Simscape File Types and Structure

Overview of the Simscape file types and structure.

Creating Custom Components

Component types, file structure, high-level workflow.

Declaring Domains and Components

Declaration section of domain and component files: purpose, definitions, rules, member summaries.

Enumerations

Specify a discrete set of acceptable values for parameters and event variables.

Declaration Functions

Use MATLAB® functions to compute derived parameter values or initialize variables.

Defining Component Variants

Use conditional sections to define variants within component file.

Defining Conditional Visibility of Component Members

Use annotation section to define conditional visibility of ports and parameters for component variants.

Working with Domain Parameters

The purpose of domain parameters is to propagate the same parameter value to all or some of the components connected to the domain.

Attribute Lists

Model attributes and member attributes used in Simscape language.

Subclassing and Inheritance

Subclassing allows you to build component models based on other component models by extension. Subclassing applies only to component models, not domain models. The syntax for subclassing is based on the MATLAB class system syntax for subclassing using the < symbol on the declaration line of the component model: