Polyphase Sample Rate Converters
Code Generation for Polyphase Sample Rate Converter
The coder supports HDL code generation for direct form FIR polyphase sample rate
dsp.FIRRateConverter is a multirate filter
structure that combines an interpolation factor and a decimation factor. This combination
enables you to perform fractional interpolation or decimation on an input signal.
The interpolation factor (
l) and decimation factor
m) for a polyphase sample rate converter are specified as integers in
properties of a
System object™. This code constructs an object with a resampling ratio of
frac_cvrter = dsp.FIRRateConverter('InterpolationFactor',5, ... 'DecimationFactor',3)
Fractional rate resampling can be visualized as a two-step process: interpolation by the
l, followed by decimation by the factor
a resampling ratio of 5/3, the object raises the sample rate by a factor of 5 using a
five-path polyphase filter. A resampling switch then reduces the new rate by a factor of 3.
This process extracts five output samples for every three input samples.
For general information on this filter structure, see the
dsp.FIRRateConverter reference page in the DSP System Toolbox™ documentation.
HDL Implementation for Polyphase Sample Rate Converter
Signal Flow, Latency, and Timing
The signal flow for the
is similar to the polyphase FIR interpolator (
dsp.FIRInterpolator). The delay line is advanced to deliver each input after
the required set of polyphase coefficients are processed.
The diagram illustrates the timing of the HDL implementation for
dsp.FIRRateConverter. A clock enable input
ce_in) indicates valid input samples. The output data, and a clock
enable output (
ce_out), are produced and delivered simultaneously,
which results in a nonperiodic output.
The clock rate required to process the hardware logic is related to the input rate as:
For a resampling ratio of 5/3, the clock rate is
ceil(5/3) = 2, or
twice the input sample rate. The inputs are delivered at every other clock cycle. The
outputs are delivered as they are produced and therefore are nonperiodic.
When the generated code or hardware logic is deployed, the outputs must be taken into a FIFO designed with outputs occurring at the desired sampling rate.
Clock Enable Ports
The HDL entity or module generated from the
dsp.FIRRateConverter filter has one input and two output clock enable
Clock enable outputs: The default clock enable output port name is
ce_out. This signal indicates when the output data sample is valid. As with other multirate filters, you can use the Clock enable output port field on the Global Settings > Ports tab of the Generate HDL dialog box to specify the port name. Alternatively, you can use the
ClockEnableOutputPortproperty to set the port name in the
The filter also passes through the clock enable input to an output port named
ce_in. This signal indicates when the object accepted an input sample. You can use this signal to control the upstream data flow. You cannot customize this port name.
Clock enable input: The default clock enable input port name is
clk_enable. This signal indicates when the input data sample is valid. You can use the Clock enable input port field on the Global Settings tab of the Generate HDL dialog box to specify the port name. Alternatively, you can use the
ClockEnableInputPortproperty to set the port name in the
Test Bench Generation
Generated test benches apply the test vectors at the correct rate, then observe and verify the output as it is available. The test benches control the data flow using the input and output clock enables.
The following example constructs a fixed-point
dsp.FIRRateConverter object with a resampling ratio of 5/3, and generates
VHDL filter code. When you generate HDL code for a System object, specify the input fixed-point data type. The object determines internal
data types based on the input type and property
frac_cvrter = dsp.FIRRateConverter('InterpolationFactor',5,'DecimationFactor',3) generatehdl(frac_cvrter,'InputDataType',numerictype(1,16,15))
### Starting VHDL code generation process for filter: filter ### Generating: H:\hdlsrc\filter.vhd ### Starting generation of filter VHDL entity ### Starting generation of filter VHDL architecture ### Successful completion of VHDL code generation process for filter: filter ### HDL latency is 2 samples
The following code generation options are not supported for