Designing LTE and LTE Advanced Physical Layer Systems with MATLAB

この 3 日コースでは、LTE および LTE Advanced 物理層の概要を説明します。参加者は、MATLAB と LTE System Toolbox™ を使って、基準 LTE 波形を生成し、エンドツーエンドの LTE PHY モデルの構築とシミュレーションを行う方法を学びます。

LTE システムの中核をなす高度な通信手法の復習
OFDMA および SC-FDMA マルチキャリア方式
MIMO マルチアンテナシステム
アップリンクとダウンリンクの LTE 物理チャネルの処理チェーンのすべての信号と要素の説明
規格準拠テストの方法

必須条件:
MATLAB 基礎コースを受講された方。ワイヤレス通信システムの基礎知識をお持ちの方。

コース概要の詳細を見る

必要条件

MATLAB^® Fundamentals and knowledge of wireless communications systems

Day 1 of 3
Introduction to 3GPP Long Term Evolution	Objective: Provide an introduction to the LTE standard and its relationship to other 3GPP standards. Understand general requirements and objectives for LTE. Get an overview of different protocol layers within LTE. 3GPP evolution from R5 to R11 Requirements Spectrum flexibility General characteristics Multi-user scheduling Resource allocation Frequency reuse planning
OFDM Theory Review	Objective: Understand the basics of OFDM modulation, cyclic prefix insertion and windowing. Motivation for multi-carrier vs single-carrier Introduction to OFDM Generation of OFDM symbols using the IFFT Cyclic prefix (guard interval) Windowing to reduce out of band emissions Oversampling and upconversion
LTE Multiplexing and Channel Coding	Objective: Understand the coding, multiplexing and mapping to physical channels for all transport channels in downlink and uplink. Transport channels and control information: DL-SCH, PCH, BCH, DCI, CFI, HI, UL-SCH and UCI Mapping of transport channels to physical channels CRC coding and masking Code block segmentation Convolutional and turbo coding Rate matching, bit selection and pruning Transport channels and control information processing chains HARQ: incremental redundancy, stop and wait

Day 2 of 3
LTE Frames, Slots and Resources	Objective: Understand the concepts of frames, subframes, slots and physical resource grids in LTE downlink and uplink. LTE Generic Frame Structure Downlink and uplink slot formats Resource elements and resource blocks Physical channels and signals
MIMO Background	Objective: Understand different MIMO techniques namely diversity, beamforming and spatial multiplexing. Learn about Singular Value Decomposition as the solution to the generic MIMO problem. Spectral efficiency and capacity Transmit and receive diversity The Alamouti Scheme Delay Diversity and Cyclic Delay Diversity Beamforming Spatial multiplexing Singular Value Decomposition Equalizing, predistortion, precoding and combining Codebooks for MIMO MMSE equalization Successive Interference Cancellation (SIC)
LTE Downlink Physical Layer Modulation	Objective: Understand processing elements for different downlink physical channels and downlink physical signals. Learn about resource grid and control channel element. Downlink physical channel processing chain Codewords and layers Scrambling and modulation Transmission schemes Diversity, spatial multiplexing and beamforming Synchronization signals: PSS and SSS Reference signals: cell and UE specific, MBSFN Downlink physical channels: PBCH, PCFICH, PDSCH and PDCCH The control region REGs and CCEs, PDCCH search spaces Resource grid mapping

Day 3 of 3
MIMO in LTE R8	Objective: Learn different MIMO techniques specified in the LTE standard. Codewords to layers mapping Precoding for spatial multiplexing Precoding for transmit diversity Beamforming in LTE Cyclic delay diversity based precoding Precoding codebooks
LTE Uplink Physical Layer Modulation	Objective: Understand processing elements for different uplink physical channels and uplink physical signals. Uplink physical channel processing chain Scrambling and modulation SC-FDMA review Uplink Reference signals: DRS and SRS Uplink physical channels: PUSCH, PUCCH, PRACH Control information: CQI, RI, PMI, HI and SR Control signaling on PUSCH and PUCCH PUCCH formats Uplink physical channels and physical signals
Procedures	Objective: Understand different physical layer procedures for both downlink and uplink specified in LTE. Cell search Cell identities in cell search Symbol synchronization Frame and cell synchronization System information acquisition: MIBs and SIBs Timing synchronization procedures Uplink power control
LTE Release 9	Objective: Learn about new features introduced in LTE Release 9. Release 9 features MBMS support Home eNodeB Positioning support Transmission schemes
LTE Release 10	Objective: Learn about new features introduced in LTE Release 10. IMT Advanced Technologies Carrier aggregation Uplink spatial multiplexing Spatial Orthogonal Resource Transmit Diversity Downlink enhanced MIMO CSI reference signals

アカデミック割引

アカデミックユーザ向けの割引価格の対象者であるか確認する

実施確定

これらのコースはご登録後、キャンセルもしくは日程変更されることはありません。

スケジュールと受講申請

結果 1 - 1 / 1

日付	開催地	言語	料金	申請
2018 年10月02日- 2018 年10月04日	US, Massachusetts, Natick	English	USD 2,250

結果 1 - 1 / 1

この価格はアメリカ合衆国, で購入および使用された際に適用されます。その他の地域での価格については、弊社営業までお問い合わせください。製品価格には、売上税、使用税、消費税、付加価値税、その他の税金は含まれていません。ご注文の際に、実際に適用される税金、関税、課徴金、賦課金および政府関係費用が確定します。詳細については、MathWorks トレーニングポリシーを参照してください。

必要条件

Designing LTE and LTE Advanced Physical Layer Systems with MATLAB

アカデミック割引

実施確定

スケジュールと受講申請

製品を見る

試す、購入する

使い方を学ぶ

サポートを受ける

MathWorks について

MathWorks

必要条件

Designing LTE and LTE Advanced Physical Layer Systems with MATLAB

アカデミック割引

実施確定

スケジュールと受講申請

Select a Web Site

How to Get Best Site Performance

Americas

Europe

Asia Pacific

製品を見る

試す、購入する

使い方を学ぶ

サポートを受ける

MathWorks について