回答済み
Why doesn't my sample time change?
If you go to *Simulation > Model Configuration Parameters*, the "Solver" pane should have a sample time setting in there set to ...

8年以上前 | 0

| 採用済み

回答済み
Comment out block vs grounding signal
As far as I know, I don't think there is a difference. In both cases, any block optimizations at code generation will remove...

8年以上前 | 0

回答済み
Define State space in simulink for pendulum inverted
Two different things! The 4-state system you provided are the system equations for the inverted pendulum on a cart. In the mo...

8年以上前 | 0

| 採用済み

回答済み
modeling friction in translational mechanical system
You should think of Simscape mechanical blocks as operating on the relative position/velocity between the R and C ports. In t...

8年以上前 | 1

| 採用済み

回答済み
Rigidly connected port error with Simscape Multibody Contact Forces Library
This error is due to a default setting with new Simulink models, which is incompatible with the Contact Forces Library. To r...

8年以上前 | 18

| 採用済み

質問

Rigidly connected port error with Simscape Multibody Contact Forces Library
Adding blocks from the <https://www.mathworks.com/matlabcentral/fileexchange/47417-simscape-multibody-contact-forces-library Sim...

8年以上前 | 5 件の回答 | 4

5

回答

回答済み
How to form a simulink block for MATLAB code ?
There is a MATLAB Function block you can use to insert your code in there: <https://www.mathworks.com/help/simulink/ug/creati...

8年以上前 | 0

回答済み
CAN bus unpack Big Endian Format
Hi Kyriakos, If you look at the <https://www.mathworks.com/help/vnt/ug/canpack.html block documentation>, you will see a diag...

8年以上前 | 1

| 採用済み

回答済み
How to create time varying inertia with Simscape Multibody?
EDIT: Variable solid blocks have been released in R2017b. _OLD ANSWER BELOW_ That object has fixed moments of inertia, so ...

8年以上前 | 0

| 採用済み

回答済み
Algebraic loop: PID control DC motor in Simscape
Check out this blog post -- I think it sums up pretty well how to address algebraic loops with continuous dynamics (like that PI...

8年以上前 | 1

| 採用済み

回答済み
How to translate a body in +Y direction?
You can use a Rigid Transform block to re-orient the Z axis before the Prismatic Joint block, so it is in the direction you want...

8年以上前 | 0

| 採用済み

回答済み
How to switch between plant on simulink
If all your plant models are linear, you could use a Linear Parameter-Varying (LPV) system. <https://www.mathworks.com/help/c...

8年以上前 | 0

回答済み
Plotting each iteration of a while loop
The easiest thing would be to use the |hold| command to prevent the plot being overwritten every time you call |plot|. The gener...

8年以上前 | 1

回答済み
How to create ROS message header time stamp?
I got this working with 2 updates. 1. The error message you have is because the ROS time object is being returned as this |mx...

8年以上前 | 3

| 採用済み

回答済み
Mapping and Navigation in Matlab
Have you seen the examples online? Building a map from sensor data, having known poses: <https://www.mathworks.com/help/robot...

8年以上前 | 0

| 採用済み

回答済み
Simulink parameters for Sensitivity Analysis
For Sensitivity Analysis to pick up a parameter, it needs to be a variable. For example, if you define myParam = 2; and ...

8年以上前 | 0

| 採用済み

回答済み
Cloud you help me.please (Detect pumpkin)
Have you tried using the Color Thresholder App? <https://www.mathworks.com/help/images/image-segmentation-using-the-color-the...

8年以上前 | 0

回答済み
Why use intermediate terms in Simscape?
There is an efficiency/memory vs. traceability difference. If you defined |Re| explicitly as an intermediate variable, you ne...

8年以上前 | 0

回答済み
How to set parameters in Simulink outside of the Mask Initailize
How about the Model preload callback? The images in this blog are old, but things still work this way: <https://blogs.mathwor...

9年弱前 | 0

回答済み
Simulink of PWM-controlled dc motor
You need a Voltage Sensor block (connected in parallel). Then, the output of that block will connect to your PS-Simulink Convert...

9年弱前 | 0

回答済み
Using vision.CascadeObjectDetector on Simulink
The issue here is that the |step| method of |vision.CascadeObjectDetector| can return a variable number of bounding boxes, from ...

9年弱前 | 0

| 採用済み

回答済み
Direct duty cycle control in MPPT
Yeah, the problem here is you're measuring Vdc incorrectly. Vdc isn't the measured DC link voltage on the output side... it's...

9年弱前 | 0

| 採用済み

回答済み
Set Parameter Block from Robotics System Toolbox doesn't change parameters in Gazebo. How should I make it work?
This is unfortunately not a MATLAB/Simulink specific problem. I have tried the same approach from a Linux terminal, where I ...

9年弱前 | 0

回答済み
ros subscriber is interrupted by ginput
This is expected, sorry to say. Recall that the MATLAB environment is single-threaded, with the exception of optimized math f...

9年弱前 | 0

回答済み
Why my topic only send once?
This is because all the blocks (Blank Message and Constant) are using a "Constant" sample time. This means they will only update...

9年弱前 | 0

回答済み
ROS stand alone node
You should be able to use |rosdevice| for this. <https://www.mathworks.com/help/robotics/ref/rosdevice-object.html> You ca...

9年弱前 | 1

回答済み
Call External C Function From Stateflow
If you go to the Model Configuration Parameters, there is a "Simulation Target" section where you specify the source files, head...

9年弱前 | 0

回答済み
when can I use a atomic subsystem in simulink model? (At what conditions we can use atomic subsystem in a model)
Virtual (or non-atomic) subsystems are simply a visual convenience, but Simulink treats the subsystems as if all the blocks exis...

9年弱前 | 10

| 採用済み

回答済み
How matlab coder, simulink coder and embedded coder dependent on each other?
MATLAB Coder is needed to use Simulink Coder. Both are then needed to use Embedded Coder. If you want standalone execution fr...

9年弱前 | 3

| 採用済み

回答済み
I have problem with derivative of an Input to Simulink-PS Converter
The Derivative block is very sensitive to the time steps your simulation is taking, and is usually not recommended. I'd sugg...

9年弱前 | 2