回答済み
how to run the matlab code step-by-step?
Use the debugger. See <http://www.mathworks.com/help/releases/R2011a/techdoc/matlab_env/f2-4931.html Editing and Debugging MATLA...

13年弱前 | 3

回答済み
the use of the linear quadratic requlator method in the state space controller and observer design
The matrices R and Q are essentially design parameters or weights that you have to choose as part of the control system design, ...

13年弱前 | 0

| 採用済み

回答済み
How can one get Block Choices for a Configurable Subsystem in an array by using Matlab Command?
get_param(gcb,'BlockChoice') will give you the current block choice for the block. get_param(gcb,'MemberBlocks') wi...

約13年前 | 1

| 採用済み

回答済み
Variable orifice
Yes, I see the same error in R2009b. The problem is with the pressure differential values, you only provide two values and the <...

約13年前 | 0

回答済み
How I can model the limit of the speed and acceleration using a Simulink block?
Presumably, you're feeding your valve block with a signal representing the opening of the valve. How is that signal generated? ...

約13年前 | 1

回答済み
Difference between Simulink Coder, Embedded Coder and Matlab Coder
MATLAB Coder is used to generate ANSI C/C++ code from MATLAB and is a pre-requisite for Simulink Coder and Embedded Coder. Simul...

約13年前 | 10

回答済み
Exporting NX (Unigraphics) models to SimMechanics
As you found out, NX is not supported out of the box. However, there is an <http://www.mathworks.com/help/releases/R2011a/toolbo...

約13年前 | 0

| 採用済み

回答済み
translational body spring damper system with friction
Hi, Looking at your model, I would make the following comments: * This is a numerically stiff system, so use a stiff solve...

約13年前 | 1

| 採用済み

回答済み
Problem to resolve algebraic loop
Put the transfer function between the voltage measurement block and the Simulink - PS Converter block, or between the PS - Simul...

約13年前 | 1

回答済み
Help in Solver error
It really isn't difficult, you need to start thinking... The following is pretty self-explanatory: <<https://lh6.googleuserco...

約13年前 | 2

回答済み
Simulink Coder(RTW) can be purchased separately without having entire Matlab software?
For Simulink Coder, you need MATLAB, MATLAB Coder and Simulink (unless you already have those, in which case you can add Simulin...

約13年前 | 0

回答済み
matlab 2011
Ask the IT department of your university what's the best way for you to access MATLAB, they may have some licenses available for...

約13年前 | 0

回答済み
Varying parameters During a simulation
Also have a look at <http://www.mathworks.com/matlabcentral/fileexchange/24294-simulink-signal-viewing-using-event-listeners-and...

約13年前 | 1

| 採用済み

回答済み
Sampletime/rate from mask Initialization
Have you tried: get_param(gcb,'CompiledSampleTime') HTH, Arnaud

約13年前 | 0

約13年前 | 0

| 採用済み

回答済み
Plotting 3D graph using measured points
Maybe try <http://www.mathworks.com/help/releases/R2011a/techdoc/ref/plot3.html |plot3|>. Arnaud

約13年前 | 1

| 採用済み

回答済み
Where can I find information on CCS IDE versions that can be supported with Embedded Coder?
<http://www.mathworks.co.uk/products/embedded-coder/ti-adaptor.html> HTH, Arnaud

約13年前 | 0

| 採用済み

回答済み
TLC file syntax help?
Have you read the documentation on <http://www.mathworks.com/help/releases/R2011a/toolbox/rtw/tlc/bp6j4co.html Target Language C...

約13年前 | 1

| 採用済み

回答済み
Photovoltaic MPPT fuzzy logic in Matlab/Simulink
If your signal is discrete, you can use the <http://www.mathworks.com/help/releases/R2011a/toolbox/simulink/slref/difference.htm...

約13年前 | 0

| 採用済み

回答済み
sample time mismatch
One of your busses has a continuous sample time, while the other one a discrete sample time of 1s. Use a <http://www.mathworks.c...

約13年前 | 2

回答済み
Transfer data wireless
You can maybe use the <http://www.mathworks.com/help/releases/R2011a/toolbox/instrument/tcpipsend.html TCP/IP Send> and <http://...

約13年前 | 1

回答済み
How do I run a simulation with a transfer function block and a multi dimensional input ?
The transfer function block only supports scalar input signals, hence the error, see the <http://www.mathworks.com/help/releases...

約13年前 | 0

回答済み
Simulink Design Optimisation
If you want to inject your measured input data in the model, use one or more root-level <http://www.mathworks.com/help/releases/...

約13年前 | 0

回答済み
Doubt in SOC of battery
The SOC is calculated as follows (see <http://www.mathworks.com/help/releases/R2011a/toolbox/physmod/powersys/ref/battery.html B...

約13年前 | 0

回答済み
Help in my model
What is the value of your resistance and what's the amplitude of your current source? I suspect current's still flowing through ...

約13年前 | 0

| 採用済み

回答済み
How to generate .m file from SIMULINK model (.mdl file)?
As Andreas suggested, use the <http://www.mathworks.com/help/releases/R2011a/toolbox/simulink/slref/sim.html |sim|> command to r...

約13年前 | 1

回答済み
Help to understand generic battery model
I think the second one is correct. The first one would be correct too if the - port was grounded (which it isn't). HTH, Ar...

約13年前 | 0

| 採用済み

回答済み
Doubt in Ideal Switch
Are you referring to the <http://www.mathworks.com/help/releases/R2011a/toolbox/physmod/powersys/ref/idealswitch.html Ideal Swit...

約13年前 | 1

回答済み
Problem with connection
Just use a <http://www.mathworks.com/help/releases/R2011a/toolbox/physmod/powersys/ref/seriesrlcbranch.html Series RLC Branch> i...

約13年前 | 3

回答済み
Connecting to xPC Target machine takes too long time
I would suggest <http://www.mathworks.co.uk/support/service_requests/contact_support.do contacting technical support>. HTH, ...

約13年前 | 0