Community Profile

# Jesús Zambrano

### MathWorks

351 2018 年以降の合計貢献数

#### Jesús Zambrano's バッジ

List of all Conditional Subsystem
Hi galaxi, In the following link you can find the definition and examples about the conditionally executed subsystems: https:/...

6日 前 | 0

Is there any way to connect a dashboard block with a constant block by command ?
Hi Abhijit, You can find the step to connect dashboards block in the link below fomr the documentation: https://www.mathworks....

7日 前 | 0

What does "Minimize algebraic loop occurrences" actually do?
Hi Miles, This parameter directs Simulink to try to eliminate the algebraic loop that contains an atomic subsystem, when it sim...

7日 前 | 1

| 採用済み

Hi bl276, Since those are differential equations, you can implement them in Simulink by using Integrator blocks. You have four ...

8日 前 | 0

XY graph and Plot graph are differnet
Hi Minjae, That is not possible. Make sure you select the same data in both cases. Try to plot each variable in a separate plot...

13日 前 | 0

Port width and dimension error
Hi David, First try to connect al those pending signals and rerun the model. This is to be sure that the MATLAB function block ...

13日 前 | 0

Configure the parameters as arguments of the step function
Hi Rodrigo, When the step function looks like: extern void MODEL_step(MODEL_T *const MODEL_M, Input_Type *arg_In,Output_Type ...

14日 前 | 0

Calculate Euler's phi function

14日 前

Times 2 - START HERE
Try out this test problem first. Given the variable x as your input, multiply it by two and put the result in y. Examples:...

15日 前

Alternate list of elements
Write a function that combines two lists by alternating the elements, e.g. ['a','b','c'], ['1','2','3'] → 'a1b2c3'.

15日 前 | 0

System Identification Loss Function
Hi Aladin, You haven't mentioned it but I guess you have been fitting your models with Suspace method (n4sid). If so, that is a...

20日 前 | 1

| 採用済み

How can I add a block to a Simulink model in the center of the model view?
Hi S. Boopalam, Once you hav place the vlock using the command add_block, you can change the position of the block using the co...

22日 前 | 0

How Do I connect Dashboard block to a constant block using command line.
Hi Pratik, You can find the step to connect dashboards block in the link below fomr the documentation: https://www.mathworks.c...

Simulink PID Tuner does not work
Hi Christoph, Even if the dynamics equations are fine, some nonlinear systems are difficult or impossible to linearize. A possi...

How to rename bus objects in the model explorer?
Hi Guilherme, I'm not sure if I understood your question, but here I give you some hints of possible workflow to check: When y...

plant cannot be linearized for PID tune
Hi Minjae, Even if the dynamics equations are fine, some nonlinear systems are difficult or impossible to linearize. A possible...

| 採用済み

Hi Elinor, Have you tried to just type simulink in the MATLAB command window?

| 採用済み

How to convert Block parameter to input port?
Hi Rahul, In general you could try to work with a MATLAB funcion block in the following way: where the MATLAB function has t...

2ヶ月 前 | 0

Regarding Transfer function blcok
Hi Nagasai, When you can say logic, it refers to include types of blocks such as AND / OR / NOT etc instead of your trasnfer fu...

2ヶ月 前 | 0

| 採用済み

How to convert Block parameter to input port?
Hi Rahul, One possible simple solution would be to keep the Sine wave amplitud equal to 1, and then add the following to the bl...

2ヶ月 前 | 0

Regarding Transfer function blcok
Hi Nagasai, A transfer function relates the process output ith its input, usually written in frequency domain, where the analys...

2ヶ月 前 | 0

Solver and logging settings
Hi Siddhanta, If you want to simulate your model with a variable step solver and the model has a part that should work with a f...

3ヶ月 前 | 0

Moving average filter cut-off frequency
Hi Mir Khadim, The cutoff frequency is defined as the frequency where the power gain is a half, also called as the −3 dB-point,...

3ヶ月 前 | 0

| 採用済み

Hi Mohsina, I see T_u matrix is loaded in you model using the From Workspace block. In this case each row of the matrix has tim...

3ヶ月 前 | 0

How to import a transfer function from workspace into simulink?
Hi Azam, One possible solution is: Create a transfer function in the workscape: for example, type in the command window F = t...

4ヶ月 前 | 2

Algebraic Loop in Simulink, missing datas
Hi, I see you have tried to introduce delays. Since you say it can only be solved in a loop (so it is not possible to solve the...

5ヶ月 前 | 0

Simulink model takes lot of time to save
Hi Barghav, Please find below some recommendations you can find in the MathWorks documentation: Modifying and Simplifying Yo...

5ヶ月 前 | 0

Why model referencing slows down the simulation?
Hi Nicolas, By default, Simulink uses 'normal mode' to simulate a reference model. Normal model means that the model is simulat...

6ヶ月 前 | 0

Solve system of equations give wrong solution
Hi Abdullah, When using vpasolve, try (if possible) to include a good guess of the solution (X0). The X0 is optional, if no val...

6ヶ月 前 | 0

| 採用済み

How to change the legend in simulation data inspector?
Hi Udhaya, Here I write you some possible solutions/suggestions to your questions: 1) The Simulink Data Inspector use as lege...

6ヶ月 前 | 0