回答済み
Generate mex file for filter
Unfortunately, it doesn't look like you can generate code from this class. Perhaps you can separate out the call to the filter i...

13年以上前 | 0

| 採用済み

回答済み
Code generation of TCP/IP block
The TCP/IP block is probably not supported for code-generation, which is why you don't see it in the generated code (do you see ...

13年以上前 | 1

| 採用済み

回答済み
empty signal coming into minimum block problem
Not sure if this is what you're looking for, but you can use the <http://www.mathworks.com/help/simulink/slref/stopsimulation.ht...

13年以上前 | 0

回答済み
Insert a detector block in simulink
Try this instead: hDetector=add_block('sldvlib/Temporal Operators/Detector',[blockName 'Detector']) You can right click ...

13年以上前 | 0

| 採用済み

回答済み
Set ports properties from Level2-M-File
Yes, you do have to specify the output port sampling modes as well. Also, your |setInPortSamMode| doesn't have the correct proto...

13年以上前 | 0

回答済み
I need PLC code generator in simulink but does not aprear in my pop menu. how can I install it?
If you need to buy a license to Simulink PLC Coder, you can either call <http://www.mathworks.com/support/contact_us/index.html ...

13年以上前 | 0

回答済み
Error in MATLAB function
Your MATLAB Function block's <http://www.mathworks.com/help/simulink/ug/matlab-function-block-editor.html#bqgwvsq-1 Ports and Da...

13年以上前 | 0

回答済み
MATLAB command line control of Simulink signal builder
Please see this <http://www.mathworks.com/matlabcentral/answers/49996 previously answered question>.

13年以上前 | 0

回答済み
errors of HDL Coder geneation in tutorial
The "cmd.exe is not recognized as an internal or external command, operable program or batch file" error usually means that you ...

13年以上前 | 0

回答済み
Is there a tutorial for exporting a Simulink Model to C++ for running in an external real time simulation?
Here is the relevant documentation: <http://www.mathworks.com/help/rtw/hardware-in-the-loop-hil-simulation.html Deploy environme...

13年以上前 | 0

回答済み
Problem in Find Simulink Block
You can use a <http://www.mathworks.com/help/simulink/ug/triggered-subsystems.html Triggered Subsystem> to do this.

13年以上前 | 1

回答済み
open another software using MATLAB
If the software has a COM interface, you can use the <http://www.mathworks.com/help/matlab/using-com-objects-in-matlab.html MATL...

13年以上前 | 0

回答済み
simulink support for Arduino evaluation
You should be able to use blocks from the <http://www.mathworks.com/help/simulink/logic-and-bit-operations.html Logic and Bit Op...

13年以上前 | 0

回答済み
how to integrate matlab code with fpga kit
You can use <http://www.mathworks.com/products/hdl-coder/index.html HDL Coder> to generate HDL code from your MATLAB functions. ...

13年以上前 | 0

回答済み
Simulink: How to start simulation of a subsystem separately?
If your subsystem is inside an <http://www.mathworks.com/help/simulink/ug/enabled-subsystems.html enabled subsystem>, you simply...

13年以上前 | 0

回答済み
CMEX S-function callback methods
You can use <http://www.mathworks.com/help/simulink/sfg/mdlsimstatuschange.html mdlSimStatusChange> (with the condition: |simSta...

13年以上前 | 0

| 採用済み

回答済み
Compiling C++ s-functions in MATLAB R2007b x86 on Windows 7 x64 Professional
The 'Specified module could not be found' error usually means that you are missing one or more DLL dependencies. Please see if t...

13年以上前 | 0

| 採用済み

回答済み
How to control no. of simulations/iterations of embedded MATLAB program in Simulink model
Please read the section <http://www.mathworks.com/help/simulink/ug/choosing-a-solver.html Choose a Solver> to understand the dif...

13年以上前 | 0

回答済み
Getting the datatype of a signal from simulink
Please see <http://www.mathworks.com/matlabcentral/answers/8679#answer_11953 this answer>.

13年以上前 | 2

回答済み
Communication between MATLAB R2010a and CCS 3.3
I think what you need is <http://www.mathworks.com/help/ecoder/ug/processor-in-the-loop-pil-simulation.html PIL Simulation>. You...

13年以上前 | 0

回答済み
Block Creation in Simulink
Please read the section on <http://www.mathworks.com/help/simulink/custom-block-basics.html Custom Block Basics> to get started....

13年以上前 | 0

回答済み
Compiled S-Function Not Found Error
What does MATLAB return when you type "mexext" at the prompt? If it returns mexa64, then you need to compile your MEX-function a...

13年以上前 | 0

回答済み
How to connect Phantom (Robot) to windows real-time target?
From <http://www.mathworks.com/help/rtwin/ug/using-i-o-boards.html this page>: "The device drivers supported by the Real-Time...

13年以上前 | 1

| 採用済み

回答済み
MATLAB compiling problem/error
I'm not sure if I can be of much help, but just some thoughts that might help you understand what might be going on: # It is ...

13年以上前 | 0

回答済み
create Executable file from simulink model
I think you might need to modify the generated code to accept the input from whatever source you need it to use.

13年以上前 | 1

回答済み
how to define x-vectorm in M S-Function
You are required to return your computed states (the vector x) in Case 2 (mdlUpdate). Please read <http://www.mathworks.com/help...

13年以上前 | 0

回答済み
How can I access the value of signals at the time of stopping the simulation.
Perhaps you can use the model callback <http://www.mathworks.com/help/simulink/ug/using-callback-functions.html#f4-56417 StopFcn...

13年以上前 | 0

回答済み
Generate a variable sine wave during simulink simulation
The Sine Wave block from the Simulink>Sources library does not accept any inputs, so you cannot use this block to change 'M' and...

13年以上前 | 0

| 採用済み

回答済み
can i install Matlab runtime (MCR) on android tab?
The MATLAB Compiler Runtime (MCR) has the same System requirements as MATLAB. See <http://www.mathworks.com/support/sysreq/previ...

13年以上前 | 0

| 採用済み

回答済み
is Simulink can contact with FPGA kit ?
Yes, you can generate HDL code from Simulink models using <http://www.mathworks.com/products/hdl-coder/index.html HDL Coder>. Pl...

13年以上前 | 0

| 採用済み