フィルターのクリア

How to filter table by variable ?

15 ビュー (過去 30 日間)
Arif
Arif 2024 年 4 月 14 日
コメント済み: Voss 2024 年 4 月 14 日
Hi guys can u help me to solve this problem. Im trying to filter my table named jointbase only for number of rows that specified in VariantIDPassed. Thanks
clear;
clc;
H = 5;
L = 15;
Ns = 2;
Nb = 1;
PortalHeight = H;
Bayspan = L;
NumberStory = Ns;
NumberBay = Nb;
% Variable1
h = [0.8,1.00,1.20,1.40,1.6,1.80];
% Variable2
Lss = [2.00,2.40,2.80,3.20,3.60,4.00];
% Variable3
Nss = [2,3,4];
% Definition
Var1HeightofTrussBeam = h;
Var2LengthSpecialSegment = Lss;
Var3NumberSpecialSegment = Nss;
% % Xbase = zeros(1,length(Totalvariant));
% % Zbase = zeros(1,length(Totalvariant));
% % Xcol = zeros(1,length(Totalvariant));
% % Zcol = zeros(1,length(Totalvariant));
% % Xos = zeros(1,length(Totalvariant));
% % Zos = zeros(1,length(Totalvariant));
% % Xss = zeros(1,length(Totalvariant));
% % Zss = zeros(1,length(Totalvariant));
% % X = zeros(1,length(Totalvariant));
% % Z = zeros(1,length(Totalvariant));
% % jointbase = zeros(1,length(Totalvariant));
% % jointcolumn = zeros(1,length(Totalvariant));
% % jointordinarysegment = zeros(1,length(Totalvariant));
% % jointtopordinarysegment = zeros(1,length(Totalvariant));
% % jointbottomordinarysegment = zeros(1,length(Totalvariant));
% % jointspecialsegment = zeros(1,length(Totalvariant));
% % jointtopspecialsegment = zeros(1,length(Totalvariant));
% % jointbottomspecialsegment = zeros(1,length(Totalvariant));
ijk = 0;
for i = 1:numel(h)
for j = 1:numel(Lss)
for k = 1:numel(Nss)
ijk = ijk+1;
Variantmodel{ijk,:} = table(ijk,h(i),Lss(j),Nss(k),'VariableNames',{'VariantID','Height','Length','Number'});
%% Base(base)
Xbase{ijk,:} = L*(0:NumberBay);
Zbase{ijk,:} = repelem(0,1,length(Xbase{ijk,:}));
%% Column(col)
Xcolumn = L*(0:NumberBay);
Zcolumn = repelem(H*(1:NumberStory),1,length(Xcolumn));
Xbotbeam = L*(0:NumberBay);
Zbotbeam = repelem((H*(1:NumberStory)-h(i)),1,length(Xbotbeam));
% replicate [X] to be the same size as [Z] for plotting:
Xcol{ijk,:} = repmat([Xcolumn,Xbotbeam],1,NumberStory);
Zcol{ijk,:} = [Zcolumn,Zbotbeam];
%% Ordinary Segment
% calculate span length of ordinary segment
Los = (L-Lss(j))/2;
Nos = Los/h(i);
Nos = round(Nos);
los = Los/Nos;
totalspan{ijk,:} = los*Nos*2+Lss(j);
if totalspan{ijk,:} == 15.000
checkspan{ijk,:} = "correct span";
else
checkspan{ijk,:} = "span must be 15m";
end
% top and bottom joint of ordinary segment(os)
XTopOrdinarySegment = reshape([los*(1:Nos),(L/2+Lss(j)/2)+los*(0:Nos-1)].'+L*(0:(NumberBay-1)),1,[]);
XBottomOrdinarySegment = XTopOrdinarySegment;
ZTopOrdinarySegment = repelem(H*(1:NumberStory),1,2*Nos*NumberBay);
ZBottomOrdinarySegment = repelem(H*(1:NumberStory)-h(i),1,2*Nos*NumberBay);
% replicate [X] to be the same size as [Z] for plotting:
Xos{ijk,:} = repmat([XTopOrdinarySegment,XBottomOrdinarySegment],1,NumberStory);
Zos{ijk,:} = [ZTopOrdinarySegment,ZBottomOrdinarySegment];
%% Special Segment
% calculate span length of special segment
lss = Lss(j)/Nss(k);
% top and bottom joint of special segment(ss)
XTopSpecialSegment = reshape((lss*(0:Nss(k))+L/2-Lss(j)/2).'+L*(0:(NumberBay-1)),1,[]);
XBottomSpecialSegment = XTopSpecialSegment;
ZTopSpecialSegment = repelem(H*(1:NumberStory),1,length(XTopSpecialSegment));
ZBottomSpecialSegment = repelem(H*(1:NumberStory)-h(i),1,length(XBottomSpecialSegment));
% replicate [X] to be the same size as [Z] for plotting:
Xss{ijk,:} = repmat([XTopSpecialSegment,XBottomSpecialSegment],1,NumberStory);
Zss{ijk,:} = [ZTopSpecialSegment,ZBottomSpecialSegment];
%% Plot Joint
X{ijk,:} = [Xbase{ijk,:},Xcol{ijk,:},Xos{ijk,:},Xss{ijk,:}];
Z{ijk,:} = [Zbase{ijk,:},Zcol{ijk,:},Zos{ijk,:},Zss{ijk,:}];
scatter(X{ijk,:},Z{ijk,:},'filled'),grid on
%check angle
tangent = (Lss(j)/Nss(k))/h(i);
anglespecialsegment(ijk) = atand(tangent);
%% Name Joint
jointbase{ijk} = table((1:numel(Xbase{ijk,:}))',Xbase{ijk,:}',Zbase{ijk,:}','VariableNames',{'ID','X','Z'});
jointcolumn{ijk} = table((max(jointbase{ijk}.ID)+1:numel(Xcol{ijk,:})+max(jointbase{ijk}.ID))',Xcol{ijk,:}',Zcol{ijk,:}','VariableNames',{'ID','X','Z'});
jointordinarysegment{ijk} = table((max(jointcolumn{ijk}.ID)+1:numel(Xos{ijk,:})+max(jointcolumn{ijk}.ID))',Xos{ijk,:}',Zos{ijk,:}','VariableNames',{'ID','X','Z'});
jointtopordinarysegment{ijk} = jointordinarysegment{ijk}(ismember(jointordinarysegment{ijk}.Z,Zcolumn),:);
jointbottomordinarysegment{ijk} = jointordinarysegment{ijk}(ismember(jointordinarysegment{ijk}.Z,Zbotbeam),:);
jointspecialsegment{ijk} = table((max(jointbottomordinarysegment{ijk}.ID)+1:numel(Xss{ijk,:})+max(jointbottomordinarysegment{ijk}.ID))',Xss{ijk,:}',Zss{ijk,:}','VariableNames',{'ID','X','Z'});
jointtopspecialsegment{ijk} = jointspecialsegment{ijk}(ismember(jointspecialsegment{ijk}.Z,Zcolumn),:);
jointbottomspecialsegment{ijk} = jointspecialsegment{ijk}(ismember(jointspecialsegment{ijk}.Z,Zbotbeam),:);
end
end
end
tablecheck = table((1:numel(anglespecialsegment))',totalspan,anglespecialsegment','VariableNames',{'VariantID','Total Span','Angle'});
VariantIDPassed = tablecheck.VariantID(tablecheck.Angle>=30 & tablecheck.Angle<=60);
jointbase = table((1:numel(jointbase))',jointbase','VariableNames',{'VariantID','Joint Base'});
jointbase = jointbase(jointbase.VariantID==VariantIDPassed,:)

採用された回答

Voss
Voss 2024 年 4 月 14 日
jointbase = jointbase(ismember(jointbase.VariantID,VariantIDPassed),:)
  2 件のコメント
Arif
Arif 2024 年 4 月 14 日
thanks, i forgot this one. I already know this function
Voss
Voss 2024 年 4 月 14 日
You're welcome!

サインインしてコメントする。

その他の回答 (0 件)

カテゴリ

Help Center および File ExchangeDevelop Apps Using App Designer についてさらに検索

タグ

製品

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by