Output state of touch sensor
Simulink® Support Package for LEGO® MINDSTORMS® EV3 Hardware
Detect whether the EV3 Touch Sensor is being pressed:
0= Not pressed
The block output emits values as uint8.
During simulations without hardware, this block emits zeros. See Block Produces Zeros or Does Nothing in Simulation.
- EV3 brick input port
Select the EV3 sensor port to which the sensor is connected. Avoid assigning multiple devices to the same port. The options are
- Sample time
Specify how often the block reads sensor values.
Smaller values require the processor to complete the same number of instructions in less time, which can cause task overruns.