Represent one button on VEX gamepad and read logical value
Simulink Coder Support Package for ARM Cortex-based VEX Microcontroller / Gamepad
The Gamepad Button block is used to represent one of the 12 buttons on the VEX® gamepad. The block reads the corresponding logical value (1 or 0) based on whether the button is pressed or released.
Port_1 — Digital signal used during simulation
Connect a source block, such as the Gamepad Simulator block from the Utilities library in Simulink® Support Package for ARM® Cortex®-based VEX Microcontroller.
This port appears only when you select the Add input port for simulation parameter.
Port_1 — Logical value representing state of button
When you press the button, the block output is
1; otherwise (in
a released state of the button), the block output is
During simulations without the hardware, this block emits zeroes if there is no source block connected to the input port (see Block Produces Zeros or Does Nothing in Simulation).
Joystick — Select joystick number
This parameter is read only. You can have a pair of VEX gamepads to control the peripherals connected to the VEX microcontroller. However, in the VEX Robotics and the BEST Robotics competitions, teams are allowed only one gamepad. Therefore, the Joystick is set to 1 by default, and it cannot be changed.
Channel (5 to 8) — Select channel or button group
Select the channel or button group on the VEX gamepad. The VEX gamepad has four channels – 5, 6, 7, and 8 – which contain a total of 12 buttons.
Button (Down, Up) — Select button in selected channel
Down (default) |
The options for this parameter vary depending on the Channel that you select. Channels 5 and 6 have Up and Down buttons only, while channels 7 and 8 have Up, Down, Right, and Left buttons. Before you make the selection, review the labeling of the buttons on the VEX gamepad.
Add input port for simulation — Add input port to simulate logical value of button
off (default) |
Select this check box to add an input port to specify a logical value of the button during simulation.
Sample time — Sample time for obtaining logical value of button
0.02 (default) | positive real number
How often the Gamepad Button block should read the logical value of the button, specified in seconds. The default value is 0.02 seconds.
If you select the Add input port for simulation check box, the Sample time parameter is hidden and its value is inherited .
C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.
During code generation, any simulation block that is connected to the input port of the Gamepad Button block is ignored and has no effect on the generated code.
Introduced in R2016a