Show Model Advisor edit-time checks
Description
Enable Model Advisor edit-time checking for the model.
Category: Model Advisor
Settings
Default: Off
- On
The Model Advisor shows edit-time checks on the Simulink® canvas while you edit your model.
If you edit the model when edit-time checking is enabled, the Model Advisor checks out a Simulink Check™ license.
- Off
The Model Advisor does not show edit-time checks on the Simulink canvas while you edit your model.
You can enable edit-time checking for your model by using one of these approaches:
Navigate to the Model Advisor Configuration Parameters from the Simulink toolstrip for your model. In the Debug tab, click Diagnostics > Edit-Time Checks. Select the check box for Edit-Time Checks.
In the Modeling tab, click Model Advisor > Edit-Time Checks. Select the check box for Edit-Time Checks.
Enable edit-time checking at the command line by using the function
edittime.setAdvisorChecking
(Simulink Check).
Tip
For more information on edit-time checking, see Check Model Compliance Using Edit-Time Checking (Simulink Check).
Command-Line Information
Parameter:
ShowAdvisorChecksEditTime |
Type: string |
Value:
"On" | "Off" |
Default:
"Off" |
Note
The parameter ShowAdvisorChecksEditTime
does not exist by
default.
Use the function edittime.setAdvisorChecking
(Simulink Check) to enable or disable edit-time
checking for the model.
Recommended Settings
Application | Setting |
---|---|
Debugging | No impact |
Traceability | No impact |
Efficiency | No impact |
Safety precaution | No impact |