Series RLC
R2026bModel series RLC network
Libraries:
RF Blockset /
Equivalent Baseband /
Series /
Shunt RLC
Description
The Series RLC block models the series RLC network described in the block dialog box, in terms of its frequency-dependent S-parameters.
For the given resistance, inductance, and capacitance, the block first calculates the
ABCD- parameters at each frequency contained in the vector of modeling frequencies, and
then converts the ABCD- parameters to S-parameters using the RF Toolbox™
abcd2s function. See the Output Port block reference page for information about determining the
modeling frequencies.
For this circuit, A = 1, B = Z, C = 0, and D = 1, where
and .
The series RLC object is a two-port network as shown in the following circuit diagram.
![]()
Parameters
Programmatic Use: Add Block
To add the block programmatically, use the add_block function with one of these library block paths as the source.
"rfseriesshuntrlcs1/Series RLC"
Example: add_block("rfseriesshuntrlcs1/Series RLC","myModel/myBlock",MakeNameUnique="on")
Version History
Introduced before R2006a
See Also
General Passive Network | LC Bandpass Pi | LC Bandpass Tee | LC Bandstop Pi | LC Bandstop Tee | LC Highpass Pi | LC Highpass Tee | LC Lowpass Pi | LC Lowpass Tee | Series C | Series L | Series R | Shunt C | Shunt L | Shunt R | Shunt RLC