このページの内容は最新ではありません。最新版の英語を参照するには、ここをクリックします。
Configure Discrete Inputs
Configure the starting address and the number of discrete input registers
R2024b 以降
モデル コンフィギュレーション ペイン: Hardware Implementation / Simulink or Embedded Coder Hardware Support Package / Hardware board settings / Target hardware resources / Modbus
Description
Select the Configure Discrete Inputs parameter to configure the starting address and the number of discrete input registers.
Dependencies
To enable this parameter, set Mode to server.
Discrete Input Register Parameters
| Parameter | Description | Default Value |
|---|---|---|
Start address | Starting address of the discrete input register Dependencies: To enable this parameter, select Configure Discrete Inputs. | 0 |
| Quantity | Number of discrete input registers Dependencies: To enable this parameter, select Configure Discrete Inputs. | 1 |
Settings
on (既定値) | offSelect this parameter to configure the starting address and the number of discrete input registers.
Recommended Settings
No recommendation.
Programmatic Use
| No programmatic use is available. |
バージョン履歴
R2024b で導入
